Oil & Gas Operators often think component failure and unplanned maintenance come from increased speed, temperature and pressure. Our data proves that it also comes from wear contamination. That’s why our CleanMud Magnetic Filtration System is proven to reduce non-productive time by at least 30%.
1
Casing and drill pipe erosion, natural iron compounds and silica create tiny metal wear particles, less than 10 microns (μm) in size. This contamination is the primary cause of component failure and cannot be captured by traditional filtration methods. CleanMud captures wear particles under 1μm, which accounts for 35% of contamination.
2
Casing and drill pipe erosion, natural iron compounds and silica create tiny metal wear particles, less than 10 microns (μm) in size. This contamination is the primary cause of component failure and cannot be captured by traditional filtration methods. CleanMud captures wear particles under 1μm, which accounts for 35% of contamination.
3
Drilling at increased speeds, temperatures and pressures cause more wear contamination. As the volume of wear contamination increases, so does the speed of the component failure. The good news is that we’ve proven that using CleanMud Magnetic Filtration will increase the lifetime of your components by 52%.
CleanMud systems come in two types:
Fully-automatic
This means that you don’t need to clean the magnetic filter elements manually. Our system automates it for you.
Semi-automatic
Our semi-automatic system requires a technician to isolate the housing, operate the cleaning cycle and return the unit to service.
