Jet-A doesn’t just fuel the engine. It lubricates and actuates the fuel control hardware metering it, through servo valve clearances as tight as 1 µm. Yet no aviation fuel or hydraulic cleanliness standard detects the sub-micron iron, steel, and silica that abrade those surfaces. ISO 4406 and NAS 1638 stop measuring at 4 to 5 µm, leaving the most wear-active contamination invisible on every cycle.
This white paper presents the technical case for that gap and traces where responsibility for it falls between separate fuel and hydraulic regulatory frameworks.
Inside the paper:
- Why the sub-4 µm fraction drives wear in FCU, HMU, and FADEC metering hardware
- How the same gap governs hydraulic flight control authority at 3,000 to 5,000 psi
- Sub-micron erosion in the hot section: turbine blades, combustor liners, and the slow efficiency loss that triggers no fault code
- Field evidence from aviation fuel analysis at Nashville International (BNA, 2021)
- The certification and oversight questions a measurement blind spot creates