Protect engines from glycol leakage that leads to sludge deposits, oil-flow restriction, cold engine seizures, additive precipitation, formation of corrosive acids, and oil balls.
ENI Glycol Gas De-hydration Improvement
Contamination entering a 3000-7000 L glycol reservoir from a 32 km pipeline had high levels of contamination as a result of pipeline corrosion. The contamination would degrade new glycol, and reduce it’s ability to cool and remove moisture from gas. Corrosion of the carbon steel piping would cause contamination build-up during transmission and storage. The glycol system was unmanned and required a low maintenance filtration solution with minimal change-outs. During the dehydration phase, if the temperature of the glycol is volatile (this occurs when high levels of iron are present) the likelihood of vaporization loss is increased, resulting in lost production.
Burlington Resources Glycol Pump Protection
The challenge was to reduce ferrous particles in the system, as they led to pump failure, and conventional filters were not effectively removing the contamination. Maintenance Manager for Burlington Resources wanted to prevent pump failures and reduce contamination down to 4 microns and below.
OEI magnetic filters are designed for 95+% efficiency: they are optimized for fluid viscosity, flow volume, flow rate, temperature, mobility, and mounting requirements.
Use of the OEI Data Form will provide the necessary specifications for OEI to
determine which product is right for you.
request a quote
4344 12th Street SE Calgary,
AB T2G 3H9 Canada
(403) 242 4221
One Eye Industries Inc. does not directly offer or supply engineering services. Our final designs and products are approved through qualified and legally authorized companies and individuals, including third parties, when appropriate.