Oil & Gas Operators often think component failure and unplanned maintenance come from increased speed, temperature and pressure. Our data proves that it also comes from wear contamination. That’s why our CleanMud Magnetic Filtration System is proven to reduce non-productive time by at least 30%.
CleanMud Drilling Case Study
CleanMud Magnetic Filtration Systems use a patented magnetic filter element to capture ferrous and non-ferrous contaminants found in drilling fluids. In a recent project, we removed an average of 25 lbs of debris every 24hrs from the drilling fluids. Removing this debris extended the life of the operator’s drilling components by over 52%.
CleanMud Hydraulic Frac Water
A CleanMud Magnetic Filtration System was used to identify the efficiency of a magnetic filter and a bag filter on both an upstream and downstream system. The tests were completed on water that had been pre-cleaned by a 10 micron-rated bag filter. During the test, the water was cycled through CleanMud System for 20 hours, after which, solid samples were captured and sent to a lab for analysis.
OEI magnetic filters are designed for 95+% efficiency: they are optimized for fluid viscosity, flow volume, flow rate, temperature, mobility, and mounting requirements.
Use of the OEI Data Form will provide the necessary specifications for OEI to determine which product is right for you
Equipment – Filter Cross Over Form
REQUEST A QUOTE
4344 12th Street SE Calgary,
AB T2G 3H9 Canada
(403) 242 4221