Description
The Bear Trap Magnetic Filter Pads attach to existing disposable spin-on filters to trap the contamination (sludge) that wears on system components and causes equipment failure. Capturing the wear contamination under 1 micron will extend fluid life (extending fluid change-out intervals) and equipment life (extending maintenance intervals).
The Bear Trap
Visit the authorized distributor for the Bear Trap Magnetic Filter Pads to learn more about the origins of One Eye Industries, and the vision of Roger Simonson.
Benefits
» Extend the life of fluids and system components.
» Extend maintenance intervals.
» Reduce oil and fluid changes.
» Does not degrade from heat and vibration.
Applications
transmissions
rear end spin-on filters
Hydraulic fluid
Engine oil
coolant
fuel
Efficiency
| Magnetic Filter Pad | Ferrous Contamination | Captures ferrous wear particles down to and below 1 μ with up to 99+% efficiency. |
| Non-ferrous Contamination | Non-ferrous particles are magnetically captured because of cross-contamination from static charge or embedded ferrous particles. |
Operating Parameters
| Pressure Rating | Standard | bar (300 psi) |
| Temperature Rating | Standard | < 150° C (300° F ) |
| PART NUMBER | DIMENSIONS Length x Width x Thickness |
| BT500 Spin-on filters up to 3" OD | 2 3/8” L x 2 3/8” W x 3/16” T |
| BT800 Spin-on filters 3" - 4" OD | 3” L x 6” W x 3/16” T |
| BT900 Spin-on filters 4" - 5" OD | 4” L x 6” W x 3/8” T |
Warranty
| Magnetic Filter Pad | 1 year |
Service Life
| Magnetic Filter Pad | 25+ years |
