Description
The ADD-Vantage 9000 includes OEI’s patented magnetic filter element as well as a stainless steel cloth element. Systems are optimized for fluid viscosity, flow volume, flow rate, temperature, mobility, and mounting requirements. This specialty ADD-Vantage 9000 design is CRN certified.
WATER
coolant
glycol
chemicals
Flow Control
This ADD-Vantage 9000 is designed with “Inside-out” flow control designs with the magnetic filter element as the primary filter. Its high holding capacity allows for extended operating life of the stainless steel cloth element which minimizes bypassing and extends cleaning intervals.
Benefits
» High holding capacity allows for extended planned maintenance periods
» Flows 43% more fluid or lube oil than conventional filters
» Installs the same as conventional filters, no retrofitting required
Efficiency
| Magnetic Filter Element | Ferrous Contamination | Captures ferrous wear particles down to and below 1 μ with up to 99+% efficiency. |
| Non-ferrous Contamination | Non-ferrous particles are magnetically captured because of cross-contamination from static charge or embedded ferrous particles. |
| Stainless Steel Cloth Element Absolute Rating Pleated, Flat Screen, Perforated | 10 μ, 25 μ, 40 μ, 150 μ | BETA 200 |
Operating Parameters
| Part Number | Port Size | Housing Size | Flow Control | Flow Rate @ 68 cSt | Pressure Rating | Temp. rating | Magnetic Filter Element |
| 9ADV9-VS216 | 1” | 4” OD x 16” L | Inside-out | 5 gpm (19 L/min) | < 7 bar (101 psi) | 75° C (167° F) | 1/2″ OD |
| 9ADV9-VS220 | 1” | 4” OD x 26” L | Inside-out | 10 gpm (38 L/min) | < 7 bar (102 psi) | 75° C (167° F) | 1/2″ OD |
Materials
| Magnetic Filter Element | Rare-earth magnets configured in a patented radial field design |
| Housing | Stainless Steel |
| Flat Screen, Perforated Cloth-Media Element | Stainless Steel |
| Seals | Stainless Steel |
Installation
| Port Type | NPT |
| Mount Type | Inline |
| Element Clearance | Housing length + 4” |
Limited Warranty
| Magnetic Filter Element | 3 years |
| Housing and Components | 1 year |
Service Life
| Magnetic Filter Element | 25+ years |
| Stainless Steel Cloth Element | 5 years |
Cleaning
Magnetic Filter Element: Remove the contamination with a lab cloth/non-fiber cloth that absorbs the contamination. Save the cloth in a sample bag to send for analysis.
Stainless Steel Cloth Element: Separate the filter element from the bypass assembly and clean with a solvent, soap and water, a parts washer, or ultrasonically. Then let the element air dry.
Use the magnetic filter element as a predictive maintenance tool by removing contamination with a lab cloth or rubber glove and depositing it into a sample jar. Send the contamination for analysis to determine the source of equipment component wear and prevent system failure.
